_filter

Overview

Image processing filter.

Configured the filter will be applied while in still image shooting mode. However, it is disabled during continuous shooting.

When _filter is enabled, it takes priority over the exposure program (exposureProgram). Also, when _filter is enabled, the exposure program is set to the Normal program.

The current setting can be acquired by camera.getOptions, and it can be changed by camera.setOptions.

Support value

Value	Description
off	No filter
DR Comp	DR compensation
Noise Reduction	Noise reduction
hdr	HDR (RICOH THETA S firmware 01.21 or above) If you use shooting command (camera.takePicture) continuously while using HDR filter, the next shooting command cannot be used until the previous shooting command is completed (i.e. state of Commands/Status is “done”).